How to get here from Perth (click to enlarge) |
From Perth
Take the Albany Highway South, travel through Williams & Kojonup.
From Kojonup you will travel approx 55 kms and you will pass over the
Gordon River Bridge.
As you travel up the hill you will see on the right hand side a white
brick driveway entrance with "Terlinga" on it.
DO NOT turn into this driveway it is just mentioned to assist your
orientation.
Continue along the Albany Highway you will travel another 5-6 kms to the
Cranbrook-Frankland Road turnoff on your right.
Turn RIGHT onto Cranbrook-Frankland Road. Travel another 1 km and the
driveway to Yardah Stud is on your right.
This is clearly marked with a blue finger signpost saying Yardah Stud.
Cranbrook-Frankland Road is the first road on the right after you have
crossed the Gordon River Bridge and is immediately before the Pinjalup Creek
bridge.
If you cross the Pinjalup Creek you will see the turn-off to Cranbrook
on your left. This means that you have gone too far if you are traveling from
the Perth direction.
From Albany
Take the Perth /Albany Highway North, travel through Mount Barker.
Approximately 35 km from Mount Barker you will see on the right side a
turnoff to Cranbrook and directional signs to Tambellup &
Katanning.
Pass this turnoff and continue approx another 3 kms and you will see
another turnoff to Cranbrook on the right.
Immediately after this you will cross the Pinjalup Creek Bridge and
immediately after that you will turn LEFT into Frankland Road.
Travel 1 km along the Frankland Road and turn into the first driveway on
your right to Yardah Stud.
This is clearly marked with a blue finger signpost saying Yardah
Stud.
Our coordinates: 34°16'39.65"S 117°29'46.48"E
No comments:
Post a Comment